Professional painters and house restorers believe that the best solution for painting a wall is to remove any wallpaper from the surface. However, wallpaper with a strong adhesive can be difficult to remove. In this case, painting on it may be the best option. Here are some tips on how to paint on paintable wallpaper border. Firstly, thoroughly clean the entire surface with trisodium phosphate (TSP) or with a similar product. The TSP is an excellent cleaning product that is often used after aquarism. But it can also be used alone. Rinse the entire surface with water and a clean cloth to remove the detergent.
Let it dry for as long as necessary. Check the condition of the paintable wallpaper border. The imperfections will be much more visible after painting the wallpaper. So it’s a good idea to fix them before applying a primer or paint hand. Cover all damaged areas with stucco or bonding dough. You may need to apply multiple layers of stucco. As the compound often shrinks once dried. You can always stain the excess binder – you cannot add more when you start painting. Use fine paper (about 120 pounds of grain) on the walls to make the surface smooth before painting. The primer and paint attach better on the polished areas.
24 Picture Gallery: To Paint On Paintable Wallpaper Border
The test of an inadequate sanding is the appearance of small air bubbles on the surface of the paintable wallpaper border. This is a clear sign that you have not polished enough wallpaper. Apply a sealant for wallpaper (optional). It is used to prevent the wallpaper from loosening after painting. Paper tape covers areas you do not want to paint. Such as skirting boards and window frames. Make sure there are no free spaces in these areas, as the paint may pass through. Then cover the edges and corners you do not want to paint. Distribute the bottom to the entire area.
These by brushing the primer based on oil or shellac. Even in this case, it avoids a water base. Once dry, smooth the wallpaper with fine grain sandpaper. Paying particular attention to areas where you have applied the stucco or binder. Paint the paintable wallpaper border following the manufacturer’s instructions for application and drying time. Instead of a latex paint, many professionals prefer to use oil-based varnish in these cases. As latex moisture may loosen the wallpaper beneath the paint layer. Remove the paper tape from the wall and check your work. You should find a beautiful wall painted. And the wallpaper below should no longer be visible.
This post topic: Paint Color