Marble has a beautiful, luxurious look that can enhance your kitchen interior. But it also comes with a high price tag. If you currently have a paint laminate countertop and want a marble one, you have to pay for both removing the old countertop and installing the new one. For a cheaper alternative, paint your laminate worktop using specific methods to make it look like marble.
Thoroughly sand the surface of the paint laminate countertop worktop with a fine release paper. This removes any shine or lust and roughens the surface. Mix disodium phosphate with water as instructed on the TSP packaging. This is an industrial strength cleaner that removes grease, dirt and junk from the countertop. Because different products have different dilution requirements, follow the product label carefully. Apply a layer of plastic paint primer with a roller to the bench surface. At the edges, use a 4-inch brush for more control. Primer helps the color stuck on the laminate surface. Allow the primer to dry thoroughly for the recommended amount of time as printed on the product label. This may take about 24 hours.
24 Picture Gallery: Paint Laminate Countertop Nice
Roll a layer of background color for your marble. Use paint laminate countertop with an eggshell finish. You can choose an off-white color, soft yellow or any other color, depending on the marble you are trying to imitate. Apply a different color on top of base coat while base coat still fresh wet. Use a 4-inch brush and wide diagonal lines leaving some space for the base color through. Do not allow the paint to dry until you get the marble look you want because dried paint is difficult to mix. To extend the time it takes for the paint to dry, add some glaze to the paint and mix it properly. Work in sections, if necessary. Mix the paint with a brush and a soft brush, easily pull the wet paint over the counter. Again, do this while the paint layer on the underside is still wet.
Tips and warning
Soak a sea of mushroom by dipping it into water, squeeze it to remove excess water, and then immerse it in the darkest color you want to use. Wipe about three quarters of the bench surface with this paint, and then mix it again with the free-hand brushing brush and rinse brush. Dip a spring or script liner brush into a color that you want to use for marble veins. Pull the brush along the direction of the marble initially, and then vary the thickness and angles for the veins for a more natural look. Do this immediately after applying the dark color with the sea sponge. The veins should look uneven cracks. Add as many friend colors and layers as you like until your bench looks like marble. Allow the paint to dry overnight. Apply a layer of protective polyurethane lacquer to make your faux marble lacquer more durable. For best results, use a lacquer with a satin or semi-gloss finish.
This post topic: Paint Color