Stair treads carpet without a wall on one or both sides are referred to as open stairs. Measure the stairs to determine the amount of carpet you will need for the corridor. Measure the width of the passage of the points you want the broker to cover. Add 1 inch to this measurement then multiplied by the total number of steps. Add 6 inches to the total. Cut the mat according to these measurements.
Click a location on each step to the edges of the pad, then mark the location of the edges of the stair treads carpet. The filling should be hidden under the carpet when installed. Cut the stuffing for each step. Put the filler pieces into place and secure the passage with electric stapler. Place the rolled up carpet on three notches above the first step. Remove the end of the carpet to the corner between the vertical underpass and down carefully.
12 Picture Gallery: Installing Stair Treads Carpet
Pull the stair treads carpet to the bottom of the riser. Secure in place with a row of staples. Make sure the carpet is tense. Pull the carpet on the top step and make it tight with knee kicker. Place another row of staples in the area between the tread of the current step and the lifting of the next stage.
This post topic: Home Ideas